[Download SPEC_SP.pdf]

PRINTING SUBSTRATES
SP SERIES PRINTING INK IS IN MEDIUM TO HIGH GLOSS APPEARANCE . APPLY THE INK BY SCREEN PRINTING METHOD . IT PROVIDE AN EXCELLANCE ADHESION , SMOOTH DRY FILM SURFACE AND ALCOHOL RESISTANT ON PP & PE SUBSTARTES.

GOLSS LEVEL
80% -98% IN ANGLE 80°.
VISCOSITY
11000-21000 cps. BROOKFIELD PIN #7. 22°C. - 25°C.

COVERAGE
30M2 - 60M2 / KGS.

RECOMMEND MESH COUNT
#36 - #180 /cm. POLYESTER MONOFILAMENT MESH WITH TENSION 10 NEWTONS UP.

RECOMMEND SQUEEGEE HARDNESS
60 – 95 SHA. SLOVENT RESISTANT TYPE.

DRYING TIME
BY CONDITION ROOM TEMPERATURE 25°C UP, HUMIDITY 70% OR LOWER.:
INITIAL DRY.: 5 MINUTES.
THROUGHLY DRY.: 6 HOURS.
BY CONDITION HEAT OVEN AT 50°C. WITH AIR FLOW.:
INITIAL DRY.: 1 MINUTES.
THROUGHLY DRY.: 20 MINUTES.

THINNING
FAST DRY.: S 168
MEDIUM.: S 169
SLOW DRY.: S 459
WASH UP SOLVENT
S 300 , S 303.

STORAGE
AVOID DIRECT SUN LIGHT, GOOD VENTILATION AND ROOM TEMPERATURE NOT EXCEED 25°C. FAR AWAY FROM ALL ELECTRICAL WARE SINCE THE PRODUCT IS HIGH FLAMMABLE.

SELF LIFE
2 YEARS UNDER ORIGINAL SEAL.

NON-TOXIC GRADE
U.S ASTM F963-03.
EN71 PART 3. 1994.

PACKING
1KGS. 18KGS.